Sliding sleeve 22–26 mm

* optimal tool for quick and trouble-free removal of wheel locks

* all tools also available individually

* set contents 8-piece in plastic case

* 2 x impact punch: (small · large)

* 2 x threaded sleeves: 1/2-drive: size 1 (23 mm) · size 2 (25 mm)

* 4 x sleeve SW22-drive: 15-18 mm · 18-21 mm · 20-23 mm · 22-26 mm

* Instructions:

1. Select the appropriate sleeve and drive it straight onto the wheel lock with the impact punch (large). (The sleeve must engage the wheel lock with a minimum insertion depth of 15 mm.)

2. Use the smaller impact punch to deform the wheel lock through the opening in the sleeve. (For extremely tight wheel locks, be sure to strike hard with a hammer first)

3. Loosen the wheel lock with a wheel brace. Using a wheel brace provides more even force distribution compared to a one-sided lug wrench.

4. When using the tool outdoors, ensure that temperatures are not below 0°C. At sub-zero temperatures, there is a high risk that the tool may break or splinter.

5. a) Wheel locks with rotating sheet metal ring: attempt to remove or block the sheet metal ring. b) Wheel locks with very flat collar, resulting in a small contact surface. Use a threaded sleeve and screw it onto the wheel bolt (counterclockwise).