Injector pressure test device 0 - 400 bar with drag pointer
753.00 €
excl. Tax, excl. shipping costs
| Product number | 4305340 |
|---|---|
| Availability | Available on order |
- Precision manometer: Ø 100 mm, grade 1.0 with rubber protective cap
Desktop device for the examination of Diesel injection nozzles on opening pressure, spray pattern and leak tightness of the injection nozzle. During the examination the liquid is squirted back into the fluid reservoir (330 cm ³) with spray protection.
The pumping lever can be changed for easier pumping to the front position (piston displacement 35 cm ³). The drag pointer stops once the pressure required for the nozzle to open is reached. Thus it is not necessary to observe both the jet of the nozzle and the manometer.
One pressure pipe (thread M 12 x 1.5) and 3 connecting adaptor are provided.
M 14 x 1.5 universal
M 12 x 1,25 VW/Audi TDi
M 10 x 1 (with sealing cone) Opel DTL/DTH
The pumping lever can be changed for easier pumping to the front position (piston displacement 35 cm ³). The drag pointer stops once the pressure required for the nozzle to open is reached. Thus it is not necessary to observe both the jet of the nozzle and the manometer.
One pressure pipe (thread M 12 x 1.5) and 3 connecting adaptor are provided.
M 14 x 1.5 universal
M 12 x 1,25 VW/Audi TDi
M 10 x 1 (with sealing cone) Opel DTL/DTH
If you are located in North, Central, or South America or Australia, we invite you to visit our international online shop at us.pichler.tools.
You order at: PICHLER Werkzeug GmbH, Pacherstraße 20,
6020 Innsbruck,
Austria