Screw extractor set complete M 5 - M 16 Lift B

Special screw extractor set made from special steel for removing torn off screws and pins from 5 - 16 mm or 3/16" - 5/8". Applicable up to a depth of 25 mm. No expanding of the hole and no damage to the thread.
Mode of operation: Drill with drill socket, hammer in the extractor pin and screw out with the nut.

Extractor pins
Size, for thread, pin-Ø mm/", - l mm
1 M 5-M 7 3,2 (1/8") 60 p/n 110 30 10
2 M 8-M 10 4,8 ( 3/16") 70 p/n 110 30 20
3 M 12 6,4 (1/4") 78 p/n 110 30 30
4 M 14 8,0 (5/16") 83 p/n 110 30 40
5 M 16 8,7 (11/32") 94 p/n 110 30 50

Extractor nut
Size drill-Øfor mm , for pin size, mm screw, l mm
1 3,2 1 10 16 p/n 110 20 10
2 4,6 2 11 16 p/n 110 20 20
3 6,4 3 13 16 p/n 110 20 30
4 8,0 4 14 16 p/n 110 20 40
5 8,7 5 17 16 p/n 110 20 50

HSS drill
Size, Ø mm, socket-Ø, l mm
1 3,2~1/8" size 1, 2, 3, 4 65 p/n 110 10 10
2 4,6~3/16" size 5, 6, 7 86 p/n 110 10 20
3 6,4~1/4" size 8 101 p/n 110 10 30
4 8,0~5/16" size 9 117 p/n 110 10 40
5 8,7~11/32" size 10 125 p/n 110 10 50

Drill sockets
Size outside Ø Inner Ø
1 7 1/8" p/n 110 40 10
2 8 1/8" p/n 110 40 20
3 9 1/8" p/n 110 40 30
4 10 1/8" p/n 110 40 40
5 11 3/16" p/n 110 40 50
6 12 1/l 6" p/n 110 40 60
7 13 1/l 6" p/n 110 40 70
8 14 1/4" p/n 110 40 80
9 15 5/16" p/n 110 40 90
10 17 11/32" p/n 110 41 00