Thread Sleeve 23x1/2 Inch Reducer Sleeve *ET

* optimal tool for quick and effortless removal and extraction of wheel locks

* all tools also available individually

* set contents 8-piece in plastic case

* 2 x impact pin: (small · large)

* 2 x thread sleeves: 1/2-drive: size 1 (23 mm) · size 2 (25 mm)

* 4 x sleeve SW22-drive: 15-18 mm · 18-21 mm · 20-23 mm · 22-26 mm

* Instructions:

1. Select the appropriate sleeve and strike it straight onto the wheel lock with the impact pin (large). (The sleeve must grip the wheel lock with at least 15 mm insertion depth.)

2. Use the smaller impact pin to compress the wheel lock through the opening of the sleeve. (For extremely tight wheel locks, be sure to compress firmly with a hammer beforehand)

3. Loosen the wheel lock with a cross wrench. A cross wrench provides more balanced force application compared to a one-sided lug wrench.

4. If the tool is used outdoors, ensure that temperatures do not fall below 0°C. At freezing temperatures, there is a high risk that the tool may break or splinter.

5. a) Wheel locks with rotating metal ring: attempt to remove or block the metal ring. b) Wheel locks with very shallow collar, resulting in small contact surface. Use thread sleeve and screw onto the wheel bolt (counterclockwise).