Skip to content
Pichler - tools since 1978
HomeChassis & AxleRadlager-WerkzeugeWheel puller 5-hole basic unit model WALLMEK with 5x nut M14x2 without spindle, hydraulics or adapter
Abziehflansch 5-Loch Grundgerät Modell WALLMEK mit 5x Mutter M14x2 ohne Spindel, Hydraulik oder Adapter – Produktbild | PICHLER 9147965

Wheel puller 5-hole basic unit model WALLMEK with 5x nut M14x2 without spindle, hydraulics or adapter

Replacement of seized and corroded wheel bearings and hubs directly on the vehicle
Art. No.:9147965

PICHLER products in the Netherlands

In your country, our products are sold exclusively through local distribution partners. For inquiries, please contact us at atpichler.tools and we will forward your request to the responsible partner in your country.

  • Wheel bearing set front and rear axle
  • Work time approx. 30 min per side
Share
For disassembling the rear wheel bearing or pressing out rusted and glued drive shafts in front. Bolt circle: 5x119-172 mm. Contents: - 9147960: 5-Hole universal puller flange - 9147962: Special nut M14x2 (5 pieces). Type: universal is to be used with hydraulic cylinder 32 t pressure and pull 90251270. Choose for other cylinder adaptations!

Description

For disassembly of rear wheel bearings or for pressing out corroded and bonded drive shafts at the front.

Bolt circle: 5x119-172 mm.

Contents:

Type: universal is to be used with hydraulic cylinder 32 t pressure and tension 90251270. For other cylinders select adaptations!

Reference number / known cross-reference: Wallmek 02-00008