Skip to content
Pichler - tools since 1978
HomeChassis & AxleRadlager-WerkzeugeWheel puller 5-hole basic unit model WALLMEK with 5x nut M14x2 without spindle, hydraulics or adapter
Abziehflansch 5-Loch Grundgerät Modell WALLMEK mit 5x Mutter M14x2 ohne Spindel, Hydraulik oder Adapter – Produktbild | PICHLER 9147965

Wheel puller 5-hole basic unit model WALLMEK with 5x nut M14x2 without spindle, hydraulics or adapter

Replacement of seized and corroded wheel bearings and hubs directly on the vehicle
Art. No.:9147965

Your contact in Sweden

In your country our products are sold exclusively through our distribution partner.

Wallmek i Kungälv AB

Wallmek i Kungälv AB

infowallmek.se+46 (0) 303 585 80
Barnebergsgatan 35
442 40 Kungälv
www.wallmek.se/
Send inquiry
  • Wheel bearing set front and rear axle
  • Work time approx. 30 min per side
Share
For disassembling the rear wheel bearing or pressing out rusted and glued drive shafts in front. Bolt circle: 5x119-172 mm. Contents: - 9147960: 5-Hole universal puller flange - 9147962: Special nut M14x2 (5 pieces). Type: universal is to be used with hydraulic cylinder 32 t pressure and pull 90251270. Choose for other cylinder adaptations!

Description

For disassembly of rear wheel bearings or for pressing out corroded and bonded drive shafts at the front.

Bolt circle: 5x119-172 mm.

Contents:

Type: universal is to be used with hydraulic cylinder 32 t pressure and tension 90251270. For other cylinders select adaptations!

Reference number / known cross-reference: Wallmek 02-00008